Gunsmith Part Nineteen Guide: Complete Walkthrough and Tips

Introduction

The world of Escape From Tarkov is brutal, unforgiving, and utterly captivating. Within this intricate game lies a complex tasking system, and among the most notorious of these tasklines is the “Gunsmith” series, orchestrated by the enigmatic mechanic, a trader who values expertly crafted firearms. These quests demand precise knowledge of weapon modifications, specific part locations, and a healthy dose of patience. Gunsmith Part Nineteen, in particular, is a hurdle that many players find exceptionally challenging. It demands not only finding the right components but also meeting strict statistical requirements, pushing even seasoned Tarkov veterans to their limits. This guide serves as your complete resource for mastering Gunsmith Part Nineteen. We’ll break down the exact requirements, present optimal builds that are easy to aquire or optimized for performance, guide you through the assembly process step by step, and share invaluable tips to minimize frustration and maximize your chances of success. Consider this your essential toolkit for conquering one of Tarkov’s toughest challenges.

Gunsmith Part Nineteen Requirements Deconstructed

Before you can even think about wrenching on a firearm, it’s crucial to understand exactly what the Mechanic is asking for. Gunsmith Part Nineteen centers around modifying an MP Five submachine gun, and these are the parameters you must meet to pass the task. Pay close attention, as even slight deviations can lead to failure.

The base weapon that this task requires is the Heckler & Koch MP Five submachine gun. This can be found through weapon crates throughout the world, bought from traders, or found on dead scavengers that you may come across during your raids.

The durability requirement is an essential specification for the weapon, as the weapon needs to be above sixty percent durability. This can be achieved by repairing it with gunsmithing repair kits available to purchase at the traders.

Ergonomics is a core stat to look out for when modifying your weapons, as it affects how fast you can aim down sights, reload, and switch to your weapon. The MP Five needs to have over forty-seven ergonomics to pass this task.

Recoil control is a major aspect of how stable your weapon is when shooting, and there is a specific requirement for this quest to consider. The vertical recoil must be below one-hundred and seventy.

The completed MP Five also needs to be under three point five kilograms in weight when fully built. As certain attachments and optics can affect this stat, you will need to carefully consider your build.

Finally, one of the harder requirements is the specific attachment requirements for the handguard and suppressor. This build will need the B & T MP Five handguard and the Rotex MP Five suppressor.

Optimal Weapon Builds: A Path to Success

Navigating the complexities of Escape from Tarkov’s weapon modding system can be overwhelming. To simplify the process, we’ll present two distinct builds: one emphasizing affordability and accessibility for those with limited budgets, and the other focused on maximizing performance while potentially requiring more expensive or harder-to-find parts. These example builds will help you conquer Gunsmith Part Nineteen.

The Budget Friendly Build

This build prioritizes readily available parts and reasonable cost, making it ideal for players who are just starting to tackle Gunsmith Part Nineteen.

• Base Weapon: Heckler & Koch MP Five Submachine Gun (Found in raid, bought from traders)
• Handguard: B & T MP Five Handguard (Bought from Mechanic Level Three)
• Suppressor: Rotex MP Five Suppressor (Bought from Mechanic Level Two)
• Stock: Standard MP Five Stock (Comes with Base Weapon)
• Rear Sight: Standard MP Five Rear Sight (Comes with Base Weapon)
• Magazine: Standard MP Five Magazine (Comes with Base Weapon)

This build meets all the durability, ergonomics, recoil, and weight requirements. It is also easy to buy the specific attachments required for this build from the traders as they are not very rare. This build keeps the weapon at its base weight as no extra items are added.

The Optimized Build

For players seeking peak performance, this build utilizes higher-end parts to maximize the MP Five’s effectiveness, albeit at a higher price point and potentially more difficult procurement.

• Base Weapon: Heckler & Koch MP Five Submachine Gun (Found in raid, bought from traders)
• Handguard: B & T MP Five Handguard (Bought from Mechanic Level Three)
• Suppressor: Rotex MP Five Suppressor (Bought from Mechanic Level Two)
• Stock: Troy M Seven A One PDW Stock (Bought from traders)
• Rear Sight: Standard MP Five Rear Sight (Comes with Base Weapon)
• Magazine: Standard MP Five Magazine (Comes with Base Weapon)

This build maximizes the potential of the MP Five. The Troy M Seven A One PDW Stock is a lighter stock that increases the ergonomics of the weapon by a lot. This makes it easier to move and aim with the weapon.

Assembly: A Step-by-Step Guide

Assembling the weapon is as simple as buying the parts and attaching them to the weapon, but here is a step by step guide to assembling the weapon.

1. Make sure the base Heckler & Koch MP Five is above sixty percent durability.
2. Attach the B & T MP Five handguard.
3. Attach the Rotex MP Five suppressor.
4. Replace the stock with a Troy M Seven A One PDW Stock.
5. Attach a standard MP Five Rear Sight.

Following these steps with either the budget or optimized build will complete the quest.

Navigating the Flea Market Alternative Parts

The Flea Market can provide some alternative parts for those who don’t want to wait until they are a high level to purchase the higher-end parts. Here are a few alternative parts you can use.

• Handguard: The alternative handguards that can be used will not allow you to complete the quest, therefore it is required to use the B & T MP Five handguard.
• Suppressor: The alternative suppressors that can be used will not allow you to complete the quest, therefore it is required to use the Rotex MP Five suppressor.
• Stock: There are a few alternative options to use for the stock as the stat boosts do not effect the completion of the quest.

Essential Tips and Tricks for Gunsmith Part Nineteen

Beyond the build itself, certain strategies and pieces of advice can significantly streamline your Gunsmith Part Nineteen experience:

• Trader Resets: Pay close attention to the trader reset timers. Check traders at the reset timers to buy parts that you may need to purchase.
• Pre-Planning is Key: Before embarking on the assembly process, meticulously plan your build. Create a checklist of required parts, their sources (traders, Flea Market, in-raid locations), and their approximate costs. This will save you time and prevent costly mistakes.
• Prioritize Ergonomics and Recoil: These are often the most challenging stats to balance in Gunsmith quests. Use external tools or websites to calculate the impact of each modification before committing to a purchase.
• Flea Market Savvy: Become adept at using the Flea Market. Use filters to find the lowest prices, and be patient. Prices fluctuate, so don’t be afraid to wait for a better deal.
• Scav Runs for Scraps: Don’t underestimate the value of Scav runs. Even if you don’t find high-value items, you can often scavenge enough parts to sell on the Flea Market to fund your Gunsmith builds.
• Consider Crafting: If available, explore crafting options. Some parts required for Gunsmith quests can be crafted in your hideout, saving you money and reducing your reliance on traders or the Flea Market.

Rewards and Ramifications: What Awaits After Completion

Successfully completing Gunsmith Part Nineteen unlocks several valuable rewards that can significantly benefit your Tarkov journey:

• Experience Points: A substantial boost to your overall level, unlocking new trader levels and other benefits.
• Trader Reputation: Increased reputation with the Mechanic, granting access to better deals and higher-tier items in his inventory.
• Money: A cash reward to help fund future endeavors.
• Unlocks: Access to the next quest in the Gunsmith series, bringing you closer to the ultimate reward of completing the entire taskline.
• New Items to Purchase: Completing a Gunsmith Task will also unlock new items that you can purchase.

Conclusion: Mastering the Mechanic’s Challenge

Gunsmith Part Nineteen is undoubtedly a challenging quest in Escape From Tarkov, demanding precision, patience, and a thorough understanding of weapon modification. However, by following this detailed guide, utilizing the recommended builds, and implementing the provided tips and tricks, you can conquer this obstacle and reap the rewards that await. Remember to plan carefully, adapt to market conditions, and never be afraid to experiment with different builds. The world of Tarkov is constantly evolving, and the best way to succeed is to stay informed and adapt to the ever-changing landscape. Good luck, and may your shots always hit their mark. Now, share your experiences! What are some of your favorite builds for Gunsmith Part Nineteen, or what tips would you offer to other players struggling with this quest? Let’s hear your strategies in the comments below!